Huge incinerators – – INDUSTRIAL INCINERATORS – – specs below.
2.) Dimension need for the burners is 750 — — 850 kg capability
3.) The bum rate need to be 80 LL 100 kg/ hour.
4) The key chamber shouId have an operating temperature level of 900 -1200 degree C.
5) The incinerator must despise a high temperature second chamber as well as 2 second gas
retention time at 850- 1150 degree C so that it appropriates for high threat materials.
6). The incinerator must have temperature level monitoring and thermostat control for ease of
operation and also guarantee of bottom temperature to validate right procedure.
7). The burner should be capable of shedding any of the hazardous wastes listed in the
8) The burner should can burning diesel oil and also need to consist of a bigger gas
tank (10-500 litres) and also generator (3 –– 40 kV )established that can be carried on the trailer with the
incinerator to make sure that the device needs no exterior electrical power supply.
9.) The burner needs to be trailer mounted so that it is a po
Contaminated materials to be Incinerated
Unsafe strong chemical:
Different types of combustible solids, made use of textiles, oil, as well as toner cartridges, chemicals
for water purification and photo consumables and plastic product, vacant
plastic/metal cans that still contain remnant unsafe material, oil absorbing.
Harmful liquid chemical:
Generally various kinds. of Acid, Paint, Varnish, Acetone, White Spirit Aromatic-less
Solvents, Artificial Liquid for Break Solutions, Aircraft De-icing Fluid, Hydraulic as well as
Compressor oil, Freon, made use of in some older refrigeration systems, Pesticide liquid/spray, air
freshen spray and various other similar chemicals.
Mostly diesel or gasoline infected by water or solvents.
Used and/or Infected oil:
Made use of electric motor oils and/or mineral oils unfit for their originally meant use. Primarily electric motor
and also transmission oil (roughly 80%) polluted by a mix of white spirit and also acetone (about 51%), hydraulic fluid (about 5%).
Waste oilshvater, leaches, hydrocarbons/water blends, solutions and also leachate.
Soil contaminated by oil, gas or 11 chemicals.
Contaminated soil polluted by chemicals that needs to be reused in land fill.
Polluted dirt—— treated and replaced on website.
Oil Contaminated Solids
Rags, Absorbents, Cardboard, oil and also fuel filters, air filters are rule out as harmful materials.
Waste electric or digital home appliances or settings up, including printed circuit card,
containing toxic material and/or heavy metal and/or emitting low radiation.
Utilized battery cells:
Dry battery, UPS battery or other types, unsorted waste batteries/ battery cells, having
products that are hazardouy.
Utilized lead-acid batteries:
Waste lead-acid batteries, rained/un-drained, and entire or smashed.
Harmful clinical waste:
Professional and related waste, arising from clinical, nursing or similar techniques and also waste
generated in facilities throughout the investigation or therapy of individuals (bio danger).
Ran out medications, strong:
Waste drugs, drugs and also medications, consisting of delicate medicines.
Ended drugs Iiquid:
Waste liquid pharmaceuticals, various type fluid chemicals for therapy, medical
grease, as well as paraffin based xpired medicines.
Ran out and/or infected fod:
Spoiled fresh food or unusable MRE’s (Meal Ready for Consume – – dry food)
Onsite Training and also Assem Option for Industrial Incinerators
I. The prospective buyers ought to includ 1a rate in their deal for training in a central location (Goma or
Bukavu) approximately 15 personnel in the operation and upkeep of the
Smart Ash Incinerators
1. Size requirement for the burners is that the device collaborates with a 55 gallon open finished
2. The system should operate wit. no gas and also use just 120V or 220V electrical energy for the blowers.
3. The system needs to can melting oil polluted wastes and also medical wastes with a dampness material of 0-15% J.
4. Each device ought to include two steel drums, to ensure that a spare drum is available.
Spare Components Choice.
If there are any type of supplier suggested spare components, that list as well as cost ought to be consisted of as a choice in the deal.